You are in:  Products / Special machines / Tacto2.0


The top range machine for Braille embossing tools

  • embossing Braille dots according to Fefco standards

  • punching a corner in order to avoid any mistakes during tools positioning

  • scribing on the surface the text of the Braille embossing Punching holes for the Accubraille® mounting system

  • cutting stripes into length

Tacto2.0 is the natural evolution of our Tacto machine, specifically developed to respond to the increasing quality demand of the diemaker needing an almost immediate availability of male embossing tools for Braille and/or Accubraille®.

  1. Getting data from CAD software Tacto2.0 can produce in a very short time the male tools which will be installed into a cutting die or Accubraillle® male tools. The machine can also be programmed directly with the use of an userfriendly graphic interface.
  2. Tacto2.0 is using precut steel stripes to produce embossing tools from one to six text lines. Tacto2.0 can use different Braille fonts and the position of the embossing dots and its pitch can be fully defined by the software. Braille text can be positioned horizontally or vertically.
  3. All the punching/cutting operations are performed by a high efficiency electric press. The whole machine structure has been conceived to create a device that can be also used in an office environment.
  4. Tacto2.0 uses a set of interchangeable cartridges. This way the section and shape of the dot in the male tool can be varied without any problem.
immagine prodotto
How much consumes your current Special machines?*

Tacto2.0 consumes only 2 KW per hour.

That's how much you can save

* You can find the data on the product label or in the manual of your current machine
** The calculation is based on 8 hours daily for 250 days a year. (0.12 € / kW - F2 band - except fixed power).

Prodotti simili:

PROFORM SRL Viale Europa Unita, 37_ 24043 Caravaggio (BG) _ ITALY
T. +39.0363.35.58.11 _ P. 02902640164_ Privacy Policy_